Forums: Climbing Information: Technique & Training: Proper tie in question: Edit Log




houser52


Aug 5, 2011, 1:36 PM

Views: 3252

Registered: Aug 5, 2011
Posts: 12

Proper tie in question
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (0 ratings)  

I came to this site to learn something about climbing and safety while being off the ground.

After combing through pages and pages on this forum I can't find an answer to a specific question about properly tying to a harness with a nylon runner.

I will be using a BD Momentum climbing harness while deer hunting from a 15' - 30' elevated stand.

Keep in mind that I do not use the harness to climb and I am not a climber but my harness will hopefully keep me safe if I should fall out of the stand. I will be tied in close so a if a fall should occur it would be only a few feet before being caught by my safety line.

I will be attaching the runner to the main safety rope (11mm Dynamic) using a carabiner and prussic loop(7mm PMI cord) and attach the other end of the runner to my harness.

I guess my question is what is the best and safest way to attach the runner to my harness? Girth hitch? Carabiner?

Thanks for your help


(This post was edited by houser52 on Aug 5, 2011, 1:44 PM)



Edit Log:
Post edited by houser52 () on Aug 5, 2011, 1:44 PM


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?