Forums: Climbing Disciplines: Indoor Gyms: Re: [csiebsen] Planning to build indoor climbing wall: Edit Log




climb4free


Dec 12, 2012, 7:44 AM

Views: 6678

Registered: Apr 11, 2007
Posts: 283

Re: [csiebsen] Planning to build indoor climbing wall
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (0 ratings)  

csiebsen wrote:
Revised version. a 15, 8 and 25 degree wall and a roof arete. Thanks to climb4free for the tips.

Use Sketchup to see the attached file to get the best view.

Let me know what you think. What would you change?
[image]http://www.rockclimbing.com/cgi-bin/forum/gforum.cgi?do=post_attachment;postatt_id=6466;[/image]

This looks great! The next thing to think about would be: on your main wall surfaces, how many full sheets of ply will it require AND how many partials. Of those partials if any end up being very close to an even 4', you may want to adjust the angles of that particular wall just slightly to avoid an unneccesary cut.

Example would be, if it would require a 1' strip, maybe lessen the angle to eliminate the extra, or if it would require a 3' strip, steepen the angle to make it an even 4'.

Edited to add: I guess this only really applies to the wall on the left, as the other walls use the 4' width.

BTW: I love the roof arete. Does that go from the far side of the 25* wall and go diagonal to the near side of the 15*?


(This post was edited by climb4free on Dec 12, 2012, 7:52 AM)



Edit Log:
Post edited by climb4free () on Dec 12, 2012, 7:49 AM
Post edited by climb4free () on Dec 12, 2012, 7:49 AM
Post edited by climb4free () on Dec 12, 2012, 7:52 AM


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?