Forums: Climbing Information: Gear Heads: Re: [bearbreeder] Use 2 Ropes as Twin and Double in Same Pitch: Edit Log




USnavy


Sep 3, 2013, 2:04 AM

Views: 7634

Registered: Nov 5, 2007
Posts: 2660

Re: [bearbreeder] Use 2 Ropes as Twin and Double in Same Pitch
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (2 ratings)  

bearbreeder wrote:
well personally id rather trust the manufacturer than some random RCer

which is why i asked them directly rather than going through the RC "yur gonna die" gongshow

i would think mammut would know what they are doing after 151 years in the climbing business

Tongue

Hello (deleted),

you had a question on your Mammut rope Phoenix 8mm and whether it can be used in twin and half rope technique in one single pitch. This is the case, you can always clip the two rope strands as twins, then split them as doubles, join again etc. This is exactly the advantage of half ropes compared to twin ropes where you always need to clip both ropes.

Hope this helps you,
best regards from Switzerland,

(deleted)

Freundliche Grüsse / Kind regards
(deleted)
Productmanager Climbing Equipment
Mammut Sports Group AG, Birren 5, CH-5703 Seon
Tel. +41 62 769 81 32, Fax +41 62 769 82 47, www.mammut.ch
The guy that replied is likely just some grunt from marketing. If you spoke to the senior R&D engineer for Mammut I bet he would tell you something different. Send an e-mail to both Bluewater and Sterling, ask to speak to an engineer, then ask the question again. I bet you will get a different answer.


(This post was edited by USnavy on Sep 3, 2013, 2:07 AM)



Edit Log:
Post edited by USnavy () on Sep 3, 2013, 2:05 AM
Post edited by USnavy () on Sep 3, 2013, 2:07 AM


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?