Forums: Climbing Disciplines: Slacklining:
Pulley systems
RSS FeedRSS Feeds for Slacklining

Premier Sponsor:

 


up_up_up


Mar 15, 2007, 5:41 PM
Post #1 of 2 (919 views)
Shortcut

Registered: Mar 1, 2006
Posts: 69

Pulley systems
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (0 ratings)  
Can't Post

So I am creating a low line in my backyard. I have set three cement blocks at either end and have equalized them to a masterpoint with a locking carabiner. I have also made aframes with different heights i can slackline at. I dont want to use a ratchet, because i have heard negative things about them, and my line is about 70'.
I have done quite a bit of research and have not found a clear drawing of how to tighten my system.

.../--------------------------\ HERE! ...

what do i do? I know i take the line and put it through a metal ring around the metal on the aframe, form here what?
DO I tie a munter hitch to a carabiner, atach a pulley here, and two pullys at my masterpoint from the equilezed anchor, and feed it though and tighthen it and tie a half hitch or what? IF you followed this please help!

thanks


dfoote07


Mar 15, 2007, 6:54 PM
Post #2 of 2 (893 views)
Shortcut

Registered: Jun 2, 2006
Posts: 50

Re: [up_up_up] Pulley systems [In reply to]
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (0 ratings)  
Can't Post

Hey go to Slackline.com and then click on community, and search through the forums there. you will find what you need. It is a complete sight. Ther are many ways for doing it. some are better then others.

Derek


Forums : Climbing Disciplines : Slacklining

 


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?
$14.36 (10% off)



Follow us on Twiter Become a Fan on Facebook