|
tjsupe
Dec 31, 2007, 1:42 AM
Post #1 of 7
(1592 views)
Shortcut
Registered: May 13, 2007
Posts: 6
|
Quick question about putting up my hangboard: First off I cant put it over a doorway so I am forced to use a wall in my garage but I dont want it directly on the wall because I wouldnt be able to work out correctly that way. I want to build some sort of extension off the wall with some plywood attached so I can bolt the hangboard to it. Has anyone ran into that same problem and what were your solutions? I am thinking of attaching 2x6 nailers to the studs of the garage wall. Then attaching a perpendicular 2x6 to the nailer and have another 2x6 angled from the stud of the wall back to end of the 2x6, creating a 'V' type of bracing. I would use to of those and attache the plywood to that. My other thought it some sort of angle iron, simlar to what is used in building a shelf on a wall. I dont think that will be strong enough, though. Hope that wasnt too confusing.
|
|
|
|
|
bmike
Dec 31, 2007, 2:04 AM
Post #2 of 7
(1586 views)
Shortcut
Registered: Dec 28, 2007
Posts: 12
|
you'd probably be better off hanging some 2x6 straight down from the ceiling rafters or joists. trying to create a shelf will require some strong connections as the angled part back to the wall will go into tension when you hang... if you go this route i'd use some all thread or flat metal for this connection - and bolt it tight and with plenty of extra room to the end of the wood. wood is not great in tension - you'll need proper end distance to your connectors if you 'hang' anything that takes a significant live load. this is increased the further from the wall you want to hang - that lever arm can start to do significant work... if you do angle back, try setting it up so the angle is below the shelf - this will put the framing in compression.
(This post was edited by bmike on Dec 31, 2007, 2:05 AM)
|
|
|
|
|
jto
Dec 31, 2007, 3:35 PM
Post #3 of 7
(1512 views)
Shortcut
Registered: Sep 18, 2004
Posts: 272
|
and... make one you can tilt too. it gives you a lot of good workouts as easy holds become very hard.
|
|
|
|
|
limeydave
Dec 31, 2007, 8:27 PM
Post #4 of 7
(1461 views)
Shortcut
Registered: Nov 23, 2006
Posts: 2453
|
Put mine above a closet door in the spare bedroom, backed with plywood.
|
|
|
|
|
gobennyjo
Dec 31, 2007, 8:32 PM
Post #5 of 7
(1457 views)
Shortcut
Registered: Jan 8, 2007
Posts: 177
|
What about above the door to the garage and just open the door when you work out
|
|
|
|
|
bmike
Dec 31, 2007, 9:44 PM
Post #6 of 7
(1449 views)
Shortcut
Registered: Dec 28, 2007
Posts: 12
|
gobennyjo wrote: What about above the door to the garage and just open the door when you work out maybe on an outswing or inswing door, but it probably won't work on overhead doors. in my experience there's no room between the way the door rolls up and the area to access the framing...
|
|
|
|
|
tjsupe
Jan 1, 2008, 1:38 AM
Post #7 of 7
(1425 views)
Shortcut
Registered: May 13, 2007
Posts: 6
|
bmike wrote: gobennyjo wrote: What about above the door to the garage and just open the door when you work out maybe on an outswing or inswing door, but it probably won't work on overhead doors. in my experience there's no room between the way the door rolls up and the area to access the framing... This is the same problem i am currently having too. I cant do a full pull up without hitting my head on the garage door sliders.
|
|
|
|
|
|