|
lanew
Jan 1, 2008, 12:24 AM
Post #1 of 16
(16104 views)
Shortcut
Registered: Jan 1, 2008
Posts: 5
|
What's everyone using for anchors? Pre-sewn slings/runners, or are you just using webbing with knots at each end? If you're buying them, can you give me a link of which one. Also, what is a good length for anchors? Thanks!
|
|
|
|
|
Tree_wrangler
Jan 1, 2008, 12:59 AM
Post #2 of 16
(16084 views)
Shortcut
Registered: Feb 8, 2007
Posts: 403
|
I've got a "bunch" of 12-14" and a few 24" pre-sewn slings. They're a good deal, since every sling is consistent in length, so it's easy to "equalize" a mono-directional anchor...no fuss, no muss..... But, I also buy 1" webbing in 100'+ sections and usually have a couple daisy-chains of it hanging off of me for anchor building. And, I've got about 30' of 8mm cordelette for anchor building too. So, although pre-sewn slings are sweet, you'll probably want to have a large quantity of 11/16" or 1" webbing on hand that you can custom cut as needed, for whatever.
|
|
|
|
|
slackinjacklyn
Jan 1, 2008, 1:11 AM
Post #3 of 16
(16074 views)
Shortcut
Registered: Nov 2, 2005
Posts: 26
|
Sterling rope has type 18 webbing sewn runners, or will custom sew runners of type 18 to any length you want, if one wants some waaay strong stuff...
|
|
|
|
|
gt29905
Jan 1, 2008, 1:33 AM
Post #4 of 16
(16056 views)
Shortcut
Registered: Oct 1, 2005
Posts: 167
|
Este es un troll, no?
|
|
|
|
|
ja1484
Jan 1, 2008, 2:43 AM
Post #5 of 16
(16022 views)
Shortcut
Registered: Aug 11, 2006
Posts: 1935
|
Jesus is my anchor.
|
|
|
|
|
jeremy11
Jan 1, 2008, 5:56 AM
Post #6 of 16
(15976 views)
Shortcut
Registered: May 28, 2004
Posts: 597
|
my slackline is girth hitched to one end, then clove hitched to the tensioning biners. the tensioning end is also girth hitched to the tree and clove hitched to the other tensioning biners. fully adjustable, all knotted, works great. fast, simple, adjustable
|
|
|
|
|
lanew
Jan 1, 2008, 8:55 PM
Post #7 of 16
(15928 views)
Shortcut
Registered: Jan 1, 2008
Posts: 5
|
Alright, next question: What is the difference between slings, runners and rabbit runners? Where/why would you use a daisy chain? Nylon or Dyneema? What lengths are other people using?
(This post was edited by lanew on Jan 1, 2008, 9:13 PM)
|
|
|
|
|
shockabuku
Jan 1, 2008, 9:26 PM
Post #8 of 16
(15904 views)
Shortcut
Registered: May 20, 2006
Posts: 4868
|
Slings and runners are generally the same thing though it seems that sling usually refers to sewn ones and runners to tied ones; they're both a loop. Rabbit runners are a sling with a small (rated) sewn loop on both ends; it's mostly a single strand. Daisies are for giving to pretty girls, your mom/grandmother, and for aid climbing. Nylon has more stretch than dyneema. Dyneema is/is like spectra and is very strong but very static.
(This post was edited by shockabuku on Jan 1, 2008, 9:34 PM)
|
|
|
|
|
lanew
Jan 1, 2008, 9:54 PM
Post #9 of 16
(15883 views)
Shortcut
Registered: Jan 1, 2008
Posts: 5
|
Thanks for al the replies so far. So I would want Type 3 or Type 5 sling? Also, what lengths are other people using?
|
|
|
|
|
plvltr.205
Jan 1, 2008, 11:11 PM
Post #10 of 16
(15860 views)
Shortcut
Registered: Nov 13, 2007
Posts: 2
|
They're both good. I like type five because i can manipulate it some, but its good to have a collection of a few different types. I recommend buying hundred foot strand of 1 in webbing so you can cut and tie to whatever you think you may need it for.
|
|
|
|
|
greenketch
Jan 2, 2008, 5:25 AM
Post #11 of 16
(15828 views)
Shortcut
Registered: Jan 12, 2005
Posts: 501
|
lanew wrote: Thanks for al the replies so far. So I would want Type 3 or Type 5 sling? [image]http://www.manutel.com/graphics/nylon_slings.jpg[/image] Also, what lengths are other people using? All of these are from a riggers handbook. The key function being that these riggers are the types you see alongside cranes and on construction sites. THere are several differences between what and how they rig and the what and how of how we rig. As long as you know the differences it's cool to use there pics. But don't ry going to a shop and tellling them you want a type 3 runner. You'll get a funny look at best.
|
|
|
|
|
lanew
Jan 2, 2008, 5:30 AM
Post #12 of 16
(15821 views)
Shortcut
Registered: Jan 1, 2008
Posts: 5
|
Yeah, good point greenketch. They are from a riggers handbook, and yes, I was just using the picture as a reference to the difference types.
|
|
|
|
|
majid_sabet
Jan 2, 2008, 5:53 AM
Post #13 of 16
(15815 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
lanew wrote: Thanks for al the replies so far. So I would want Type 3 or Type 5 sling? [image]http://www.manutel.com/graphics/nylon_slings.jpg[/image] Also, what lengths are other people using?
(This post was edited by majid_sabet on Jan 2, 2008, 7:02 AM)
|
|
|
|
|
damianc
Jan 2, 2008, 6:52 AM
Post #14 of 16
(15786 views)
Shortcut
Registered: Dec 31, 2005
Posts: 33
|
I use Polyester Industrial Roundslings (AKA "Spansets") for everything these days (highlines, lowlines, and long lines). The working load limit (WLL) of the ones I use is 5300 lbs. in a dead vertical lift, and they have a safety factor of 5:1, which means they won't break until 26,500 lbs. Overkill? Maybe, but I never have to worry about an anchor blowing.
|
|
|
|
|
lanew
Jan 3, 2008, 7:09 AM
Post #15 of 16
(15710 views)
Shortcut
Registered: Jan 1, 2008
Posts: 5
|
When they give a length for a sling, do they give the length of the entire webbing, or the webbing folded in half? IE: a 36" sling laid down as a circle, would it have a 36" circumference or 72" circumference.
|
|
|
|
|
damianc
Jan 3, 2008, 8:23 AM
Post #16 of 16
(15698 views)
Shortcut
Registered: Dec 31, 2005
Posts: 33
|
They're measured end to end. So a 36" round sling would have a circumference of 72".
|
|
|
|
|
|