|
sungam
Mar 4, 2009, 5:24 AM
Post #2 of 30
(17584 views)
Shortcut
Registered: Jun 24, 2004
Posts: 26804
|
They look similar to the X-monsters. Very, very similar. You'll want some kind of grip on them, I dunno how well you'll be able to hold onto wet/icy metal. Can you replace the pick on the "monster"?
|
|
|
|
|
adatesman
Mar 4, 2009, 5:26 AM
Post #3 of 30
(17579 views)
Shortcut
Registered: Jul 13, 2005
Posts: 3479
|
|
|
|
|
|
rschap
Mar 4, 2009, 5:41 AM
Post #5 of 30
(17563 views)
Shortcut
Registered: Sep 30, 2005
Posts: 592
|
Yeah I admit that the geometry of the bottom handle in relation to the head was copied from the monster, but I did change it a lot over all. The heads are replaceable and I made a more aggressive and less aggressive head for them. The grips aren’t bad at all, they’re a little thin (only 11/16” thick) but other than that they work fine. The problem I’m having with them is they are heavy, about twice the weight of my X15s. I have a new design that will be much lighter I just haven’t cut them out yet.
|
|
|
|
|
angry
Mar 4, 2009, 6:04 AM
Post #6 of 30
(17551 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
I climb on homemade tools and LOVE (LOVE) them. Mine are a titanium shaft with a modular head and laser cut picks. The picks will not break, the designer tried like hell and only managed to bend one. With the TI shaft the only weight in the tool at all is in the head. Great sticks. They look like the tin-man's tools and climb on par or above anything on the market.
|
|
|
|
|
sungam
Mar 4, 2009, 5:17 PM
Post #7 of 30
(17469 views)
Shortcut
Registered: Jun 24, 2004
Posts: 26804
|
I've held Angry's tool, it made me more of a man. [/inuendo]
|
|
|
|
|
brownie710
Mar 4, 2009, 6:51 PM
Post #8 of 30
(17450 views)
Shortcut
Registered: Aug 25, 2007
Posts: 531
|
rschap wrote: Yeah I admit that the geometry of the bottom handle in relation to the head was copied from the monster, but I did change it a lot over all. The heads are replaceable and I made a more aggressive and less aggressive head for them. The grips aren’t bad at all, they’re a little thin (only 11/16” thick) but other than that they work fine. The problem I’m having with them is they are heavy, about twice the weight of my X15s. I have a new design that will be much lighter I just haven’t cut them out yet. Twice the weight of x-15's !!!! holy cow. my buddy climbs with x-15's and they are super heavy. i'm guessing your built like a brick house if your going to be climbing with your homemade tools!
|
|
|
|
|
angry
Mar 4, 2009, 7:03 PM
Post #9 of 30
(17447 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
Same guy that made my technical tools makes a mountain axe that's lighter than even the flimsy ski mountaineering crap and as strong as any beefy axe out there. If I got one, I'd get the heavier steel head (instead of ti) version because it sticks in ice better. Do you live in the Denver area? If so, I think you two should hang out. He's full of ideas and is familiar with the process of prototyping stuff.
|
|
|
|
|
tallnik
Mar 4, 2009, 7:23 PM
Post #10 of 30
(17434 views)
Shortcut
Registered: Apr 18, 2004
Posts: 595
|
I can't wait to see the lighter weight version! Very rad looking design. The handles look a little uninsulated for quebec ice climbing in January! However, I'm sure that could be tweaked on later versions/ dealt with personally. Nik
|
|
|
|
|
sungam
Mar 4, 2009, 7:33 PM
Post #11 of 30
(17424 views)
Shortcut
Registered: Jun 24, 2004
Posts: 26804
|
On a side note, I had a funny idea the other day. If you needed to put rubber on a handle or whatever, isn't 5.10 releasing a "paint on" sticky rubber? I wonder how grippy that would be when wet...
|
|
|
|
|
brent_e
Mar 4, 2009, 8:06 PM
Post #12 of 30
(17409 views)
Shortcut
Registered: Dec 15, 2004
Posts: 5111
|
sungam wrote: On a side note, I had a funny idea the other day. If you needed to put rubber on a handle or whatever, isn't 5.10 releasing a "paint on" sticky rubber? I wonder how grippy that would be when wet... I'm going to try that on my tools and see how it works. rschap, you have a waterjet, try cutting out tool using Grivel's monster or X-monster head. they can be had for 50 bucks(yes, replaceable). I've found it the easiest and lightest pick to adapt and you can copy the insert they use for their heads pretty easily. Brent
|
|
|
|
|
sungam
Mar 4, 2009, 8:16 PM
Post #13 of 30
(17403 views)
Shortcut
Registered: Jun 24, 2004
Posts: 26804
|
I was thinking of using it on my quantum techs. I'll see how yours goes first
|
|
|
|
|
angry
Mar 4, 2009, 8:21 PM
Post #14 of 30
(17398 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
You could mix salt with plasti dip and dip your handle. Once the salt disolves, you're left with a rough pitted surface. Or a big fucking mess.
|
|
|
|
|
sungam
Mar 4, 2009, 8:25 PM
Post #15 of 30
(17393 views)
Shortcut
Registered: Jun 24, 2004
Posts: 26804
|
angry wrote: You could mix salt with plasti dip and dip your handle. Once the salt disolves, you're left with a rough pitted surface. Or a big fucking mess. hmmm, cunning plan. Any other ideas>?
|
|
|
|
|
rschap
Mar 5, 2009, 12:47 AM
Post #16 of 30
(17355 views)
Shortcut
Registered: Sep 30, 2005
Posts: 592
|
brent_e wrote: sungam wrote: On a side note, I had a funny idea the other day. If you needed to put rubber on a handle or whatever, isn't 5.10 releasing a "paint on" sticky rubber? I wonder how grippy that would be when wet... I'm going to try that on my tools and see how it works. rschap, you have a waterjet, try cutting out tool using Grivel's monster or X-monster head. they can be had for 50 bucks(yes, replaceable). I've found it the easiest and lightest pick to adapt and you can copy the insert they use for their heads pretty easily. Brent My heads are replacable and for now I can cut a set for about $12 or so. The material is free for now because it's left over from a company that went under. After I run out of that I'll still be able to make them for under $20. Yatah! thanks Sungam.
|
Attachments:
|
IMG_3748.JPG
(108 KB)
|
|
|
|
|
rschap
Mar 5, 2009, 12:57 AM
Post #18 of 30
(17346 views)
Shortcut
Registered: Sep 30, 2005
Posts: 592
|
My next handles are going to be hardwood and thicker.
|
|
|
|
|
brent_e
Mar 6, 2009, 4:35 PM
Post #19 of 30
(17253 views)
Shortcut
Registered: Dec 15, 2004
Posts: 5111
|
angry wrote: You could mix salt with plasti dip and dip your handle. Once the salt disolves, you're left with a rough pitted surface. Or a big fucking mess. I think you have to put the plasti dip on, then sprinkle coarse salt on top of it. dip it in water when the plasti dip is dry.
|
|
|
|
|
brent_e
Mar 6, 2009, 4:36 PM
Post #20 of 30
(17251 views)
Shortcut
Registered: Dec 15, 2004
Posts: 5111
|
rschap wrote: brent_e wrote: sungam wrote: On a side note, I had a funny idea the other day. If you needed to put rubber on a handle or whatever, isn't 5.10 releasing a "paint on" sticky rubber? I wonder how grippy that would be when wet... I'm going to try that on my tools and see how it works. rschap, you have a waterjet, try cutting out tool using Grivel's monster or X-monster head. they can be had for 50 bucks(yes, replaceable). I've found it the easiest and lightest pick to adapt and you can copy the insert they use for their heads pretty easily. Brent My heads are replacable and for now I can cut a set for about $12 or so. The material is free for now because it's left over from a company that went under. After I run out of that I'll still be able to make them for under $20. Yatah! thanks Sungam. what material are you using?
|
|
|
|
|
jaablink
Mar 6, 2009, 4:47 PM
Post #21 of 30
(17245 views)
Shortcut
Registered: Apr 1, 2004
Posts: 537
|
Just a thought. It may be an advantage to add teeth to the top rounded section of the picks.
|
|
|
|
|
granite_grrl
Mar 6, 2009, 4:49 PM
Post #22 of 30
(17244 views)
Shortcut
Registered: Oct 25, 2002
Posts: 15084
|
sungam wrote: angry wrote: You could mix salt with plasti dip and dip your handle. Once the salt disolves, you're left with a rough pitted surface. Or a big fucking mess. hmmm, cunning plan. Any other ideas>? Liquide Latex?
|
|
|
|
|
rschap
Mar 7, 2009, 2:02 AM
Post #23 of 30
(17189 views)
Shortcut
Registered: Sep 30, 2005
Posts: 592
|
jaablink wrote: Just a thought. It may be an advantage to add teeth to the top rounded section of the picks. I've taken one too many ads to the head for that. Brent e I used AR plate, it's a hard Abrasion Resistant steel alloy.
|
|
|
|
|
brent_e
Mar 8, 2009, 3:57 PM
Post #24 of 30
(17130 views)
Shortcut
Registered: Dec 15, 2004
Posts: 5111
|
rschap wrote: jaablink wrote: Just a thought. It may be an advantage to add teeth to the top rounded section of the picks. I've taken one too many ads to the head for that. Brent e I used AR plate, it's a hard Abrasion Resistant steel alloy. what's the alloy, out of curiosity?
|
|
|
|
|
angry
Mar 8, 2009, 4:09 PM
Post #25 of 30
(17125 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
brent_e wrote: rschap wrote: jaablink wrote: Just a thought. It may be an advantage to add teeth to the top rounded section of the picks. I've taken one too many ads to the head for that. Brent e I used AR plate, it's a hard Abrasion Resistant steel alloy. what's the alloy, out of curiosity? I kinda thought he was getting cute with an allusion to Aremet.
|
|
|
|
|
|