|
|
|
|
Travis_22
Oct 20, 2009, 1:25 PM
Post #1 of 15
(7336 views)
Shortcut
Registered: Jul 11, 2009
Posts: 29
|
Like I said, I want to make a climbing wall on the ceiling of a small room in my house. I don't have room for a normal vertical wall, but I have plenty of ceiling space. I wanted to start out with a whole bunch of big jugs and just get some strength, then slowly move smaller and smaller with the holds. I have done a little reading about making a wall, but I haven't been able to get some information on how to secure a wall to a ceiling. This is what I have planned so far: get some 2x2 in long lengths to run along the rafters on the ceiling. Then I was going to attach my plywood to those via normal screws. I was hoping this would give me a little more space so I don't accidentally screw one of my hold bolts into the sheet rock. My main concern is if this would be able to support my weight (using the proper amount of screws). I weigh about 190lbs and am not going to be losing weight. If anyone has any experience making a climbing wall on your ceiling, I would love to hear how you did it. I'm also not worried about injuries and such, climbing upside down shouldn't be a concern... If you are tempted to post something that has nothing to do with the topic, please save your time and mine. Thanks.
(This post was edited by Travis_22 on Oct 21, 2009, 2:16 AM)
|
|
|
|
|
acorneau
Oct 20, 2009, 1:38 PM
Post #2 of 15
(7324 views)
Shortcut
Registered: Feb 6, 2008
Posts: 2889
|
Lots of long wood screws. Oh, and make sure you hit the joists! Good luck.
|
|
|
|
|
angry
Oct 20, 2009, 1:39 PM
Post #3 of 15
(7323 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
Travis_22 wrote: Like I said, I want to make a climbing wall on the ceiling of a small room in my house. I don't have room for a normal vertical wall, but I have plenty of ceiling space. I wanted to start out with a whole bunch of big jugs and just get some strength, then slowly move smaller and smaller with the holds. I have done a little reading about making a wall, but I haven't been able to get some information on how to secure a wall to a ceiling. This is what I have planned so far: get some 2x2 in long lengths to run along the rafters on the ceiling. Then I was going to attach my plywood to those via normal screws. I was hoping this would give me a little more space so I don't accidentally screw one of my hold bolts into the sheet rock. My main concern is if this would be able to support my weight (using the proper amount of screws). I weigh about 190lbs and am not going to be losing weight. If anyone has any experience making a climbing wall on your ceiling, I would love to hear how you did it. I'm also not worried about injuries and such, climbing upside down shouldn't be a concern... If you are tempted to post something that has nothing to do with the topic, please save your time and mine. Thanks. One time, when I was a little kid, I tried to jump my bike and the handlebars came off when I pulled up. It was a great wreck. Thanks for your time.
|
|
|
|
|
Travis_22
Oct 20, 2009, 1:58 PM
Post #4 of 15
(7311 views)
Shortcut
Registered: Jul 11, 2009
Posts: 29
|
^^^^ funny ^^^^ I actually did something similar, it was off of a jump. It had those stupid "U" shaped handlebars, and I bent them beyond belief.
(This post was edited by Travis_22 on Oct 20, 2009, 1:59 PM)
|
|
|
|
|
johnwesely
Oct 20, 2009, 3:10 PM
Post #5 of 15
(7285 views)
Shortcut
Registered: Jun 13, 2006
Posts: 5360
|
One time I was climbing on my roof and I fell onto my television.
|
|
|
|
|
Travis_22
Oct 20, 2009, 5:07 PM
Post #6 of 15
(7262 views)
Shortcut
Registered: Jul 11, 2009
Posts: 29
|
I cant top that... My uncle fell through our roof at night right into our foster kid's room. He is about 6'4", needless to say they were starteled. This is fun and all, but if anyone has any info, I would love to hear it.
|
|
|
|
|
agentmm
Oct 20, 2009, 5:43 PM
Post #7 of 15
(7245 views)
Shortcut
Registered: Mar 27, 2009
Posts: 62
|
Use heavier screws for stripping that 2x2 up....If you mount the plywood up and you feel a corner let go (2x2 to rafter, not ply to 2x2) it's a pain to fix... Essentially, it's overkill but will save you possible troubles... Let's see it after you're done..
|
|
|
|
|
rrrADAM
Oct 21, 2009, 12:52 AM
Post #8 of 15
(7205 views)
Shortcut
Registered: Dec 19, 1999
Posts: 17553
|
You would do a lot better just putting the plywood directly to the ceiling with 3" deck crews, as if you use the right size bolt, you should only get a 1/4" past the t-nut. If you ever end up taking it down, just fill the holes and give it all a quick skim coat. That's what I did: http://www.rockclimbing.com/...post=2161978#2161978
|
|
|
|
|
sidepull
Oct 21, 2009, 2:01 AM
Post #9 of 15
(7187 views)
Shortcut
Registered: Sep 11, 2001
Posts: 2335
|
start by finding the silent "b"
|
|
|
|
|
Travis_22
Oct 21, 2009, 2:26 AM
Post #10 of 15
(7177 views)
Shortcut
Registered: Jul 11, 2009
Posts: 29
|
Fixed, kind of... Should help with future searching. And screwing it in with 3" supports your bodyweight well? Thanks for the advise, that would make it easier. Great wall, BTW.
|
|
|
|
|
ryanb
Oct 21, 2009, 3:08 AM
Post #11 of 15
(7160 views)
Shortcut
Registered: Nov 4, 2004
Posts: 832
|
rrrADAM wrote: You would do a lot better just putting the plywood directly to the ceiling with 3" deck crews, as if you use the right size bolt, you should only get a 1/4" past the t-nut. If you ever end up taking it down, just fill the holes and give it all a quick skim coat. That's what I did: http://www.rockclimbing.com/...post=2161978#2161978 Totally depends what the ceiling is framed with. Screws are plenty strong to hold the plywood up but make sure the framing you screw them into is burly enough (use a span table like this: http://www.msrlumber.org/spantables.pdf) or you are going to flex your whole ceiling and crack your sheetrock.
|
|
|
|
|
brokesomeribs
Nov 4, 2009, 8:20 PM
Post #12 of 15
(7065 views)
Shortcut
Registered: Jul 20, 2009
Posts: 361
|
Travis_22 wrote: This is what I have planned so far: get some 2x2 in long lengths to run along the rafters on the ceiling. Then I was going to attach my plywood to those via normal screws. I was hoping this would give me a little more space so I don't accidentally screw one of my hold bolts into the sheet rock. You're diving into the ocean and forgetting your floaties. Guess what! You're gonna drown. Hire a carpenter.
|
|
|
|
|
jbk641
Nov 10, 2009, 8:16 PM
Post #13 of 15
(6903 views)
Shortcut
Registered: Aug 11, 2009
Posts: 106
|
I just finished a garage ceiling..I have a few pics up www.garagewoody.com I marked a ceiling template of all the attic rafters and screwed 4 inch screw through2X4 through sheet rock to the rafters.. Overkill, cause I DO NOT WANT TO WORRY....Did 3 boards/sheet of plywood. I reinforced backs of some t nuts with metal. I also used tnuts with 3 screws cause this isnt coming down anytime soon and it will be hard to fix a spinning t nut. Also place a few d rings for attaching safty harness and place so you can climb from one area to the next area whil secured,,,,or just use a pad..I have both
|
|
|
|
|
squierbypetzl
Moderator
Nov 10, 2009, 8:31 PM
Post #14 of 15
(6897 views)
Shortcut
Registered: Jul 6, 2005
Posts: 3431
|
What is the pvc pipe screwed to the ceiling for?
|
|
|
|
|
jbk641
Nov 25, 2009, 10:52 PM
Post #15 of 15
(6715 views)
Shortcut
Registered: Aug 11, 2009
Posts: 106
|
Actually it was going to be cheap hold that turned into a training device for contact strenth/hanging. However its too high on the ceiling. I just havent taken it down yet....
|
|
|
|
|
|