|
joeforte
Oct 26, 2009, 5:56 PM
Post #2 of 23
(11227 views)
Shortcut
Registered: May 9, 2005
Posts: 1093
|
It looks like the first 'biner gets loaded way off axis (near it's nose) when the thing locks up. I've never seen this before!
|
|
|
|
|
moose_droppings
Oct 26, 2009, 6:05 PM
Post #3 of 23
(11218 views)
Shortcut
Registered: Jun 7, 2005
Posts: 3371
|
He said, "Unicorns are pretty when they run, also, I like peanut butter." I agree with Joe, looks a little sketch to me.
|
|
|
|
|
johnwesely
Oct 26, 2009, 7:01 PM
Post #4 of 23
(11158 views)
Shortcut
Registered: Jun 13, 2006
Posts: 5360
|
His carabiner is not even closed.
|
|
|
|
|
justroberto
Oct 26, 2009, 7:03 PM
Post #5 of 23
(11155 views)
Shortcut
Registered: Feb 21, 2006
Posts: 1876
|
Aside from acting like an atc-guide (an unnecessary luxury), it doesn't seem to add anything to the munter that can't be achieved simply through other techniques (munter-mule). I wouldn't be worried about either of the biners magically exploding upon loading, though. I wouldn't use it, but wouldn't feel uncomfortable if a partner did.
|
|
|
|
|
coolcat83
Oct 26, 2009, 7:04 PM
Post #6 of 23
(11151 views)
Shortcut
Registered: Jan 27, 2007
Posts: 1007
|
yup it does look pretty sketchy. and I agree the loading on the gate doesn't look good either.
|
|
|
|
|
abe_ascends
Oct 26, 2009, 7:13 PM
Post #7 of 23
(11138 views)
Shortcut
Registered: Jun 18, 2005
Posts: 367
|
He is clearly quite skilled. Just look at how he locks his biners. Edit: Dammit, beat to the punch.
(This post was edited by abe_ascends on Oct 26, 2009, 7:14 PM)
|
|
|
|
|
justroberto
Oct 26, 2009, 7:13 PM
Post #8 of 23
(11137 views)
Shortcut
Registered: Feb 21, 2006
Posts: 1876
|
coolcat83 wrote: and I agree the loading on the gate doesn't look good either. the simple solution being to turn the main biner around and keep an eye on everything.
|
|
|
|
|
justroberto
Oct 26, 2009, 7:15 PM
Post #9 of 23
(11128 views)
Shortcut
Registered: Feb 21, 2006
Posts: 1876
|
abe_ascends wrote: Just look at how he locks his biners. The simple solution being to lock the biners.
|
|
|
|
|
coolcat83
Oct 26, 2009, 7:16 PM
Post #10 of 23
(11128 views)
Shortcut
Registered: Jan 27, 2007
Posts: 1007
|
true, still I wouldn't use it, and it seems this guy does a lot of things that are rescue oriented, at rescue loads It could be an issue.
|
|
|
|
|
justroberto
Oct 26, 2009, 7:21 PM
Post #11 of 23
(11120 views)
Shortcut
Registered: Feb 21, 2006
Posts: 1876
|
coolcat83 wrote: true, still I wouldn't use it, and it seems this guy does a lot of things that are rescue oriented, at rescue loads It could be an issue. very true. like i said, i wouldn't ever find a need to use it. i still think it's kind of a clever braking mechanism.
|
|
|
|
|
philbox
Moderator
Oct 26, 2009, 7:35 PM
Post #12 of 23
(11102 views)
Shortcut
Registered: Jun 27, 2002
Posts: 13105
|
I thought this worth moving in here as it contains some worthwhile discussion on an innovation to the muenter. It's also topical for me as I am currently engaged in an advanced rope rigging and rescue course down at the Blue Mountains. I'm having a lot of my preconceived notions challenged. Awesome course too.
|
|
|
|
|
kachoong
Oct 26, 2009, 7:45 PM
Post #13 of 23
(11090 views)
Shortcut
Registered: Jan 23, 2004
Posts: 15304
|
Interesting.... I'm not at home to practice but I wonder what the results would be if his second carabiner was either smaller or larger than the first? How would that affect the locking? Should they be the same size?
|
|
|
|
|
freerangequark
Nov 2, 2009, 6:19 PM
Post #14 of 23
(10869 views)
Shortcut
Registered: Jul 23, 2006
Posts: 107
|
It looks like he's (poorly) rigged two biners through the munter to get something that functions like a garda. I'll stick to my Guide ATC. -Glenn
|
|
|
|
|
xtrmecat
Nov 2, 2009, 7:47 PM
Post #15 of 23
(10807 views)
Shortcut
Registered: Apr 1, 2004
Posts: 548
|
I see another issue. If I need to lock off with a mule on anything, once loaded I have control over the releasing and can lower at will. This appears to me that once locked up, would take some shenanigans to take off the brake and start lowering the load, say a second needed lowering. Bob
|
|
|
|
|
maldaly
Nov 2, 2009, 7:57 PM
Post #16 of 23
(10801 views)
Shortcut
Registered: Oct 31, 2002
Posts: 1208
|
Look like he's just figured out a way to make a Munter an autoblock. If he was more careful about which way the primary 'biner was rigged the gate-load thing would go away. Very interesting and another good tool for the toolbox. What he doesn't show, however, is how to release a load under tension. From the video I can't tell if it would be possible, even with a re-directed body haul. This problem, of course, it the flaw in the whole auto-block method of belaying a second. While everyone claims that they can do it (or that at least they've read the instructions) I see very few setups in the field which I think would be safely releasable under control with a full load. My advise for belaying directly off the anchors? Use a plain Munter hitch and don't let go of the brake strand. Climb safe, Mal
|
|
|
|
|
bennydh
Nov 2, 2009, 8:21 PM
Post #17 of 23
(10783 views)
Shortcut
Registered: May 2, 2005
Posts: 368
|
freerangequark wrote: It looks like he's (poorly) rigged two biners through the munter to get something that functions like a garda. I'll stick to my Guide ATC. -Glenn These were my thoughts exactly, It autolocks, and you can't feed anything, so there is no advantage over the much safer Garda.
|
|
|
|
|
knudenoggin
Nov 5, 2009, 6:11 PM
Post #18 of 23
(10694 views)
Shortcut
Registered: May 6, 2004
Posts: 596
|
maldaly wrote: Very interesting and another good tool for the toolbox. Frankly, this looks quite dubious: the orientation of the added 'biner seems to be dependent upon its particular size/shape AND the nature of the anchor ring into which it's clipped -- at least, to my eyes, those factors play a big role in putting the 'biner to where it has that locking effect. As for not locking the biners, geeesh, notice that w/o holding the first one, it doesn't close fully, sufficient to let the locking sleave encompass the nose? But, eureka(!), there IS a neat lock to be had for the Mezzo Barcaiolo (M.B.) (aka "Munter"), but not releasable: UNclip that video's added 'biner from the ring -- leaving it clipped through the M.B. --, and clip into it the haul line; this 'biner floats beneath the M.B., thus. So clipped (and it could be clipped through the M.B. at a right angle to this, going through the other two spaces on the quad formed by the "X" of the M.B.), this 'biner I think aids the free flow of rope through the structure, but on release and load on the fall line only, the M.B. will collapse and bind around the 'biner snug, looking good. I just took a few pics of this, which I'll try to post soon. But it should be easy to figure out. At the crossing point of the Demi-Cabestan / M.B. / Halbmastwurf / Munter, clip around it (one way or the other), and then clip the line that holds the braked load. (One can regard the crossing point --were rope collars itself-- of the M.B. as an "+" compass axes; clip through either the NE+SW or else NW+SE quadrants. I believe that clipping through the quadrant that the Spanish video shows clipped is best for keeping the M.B. open & flowing for pulling through rope; clipping the other side doesn't seem to provide as nice a movement.) .:. QED *knudeNoggin*
|
|
|
|
|
|
|
|
yokese
Nov 6, 2009, 8:32 AM
Post #20 of 23
(10591 views)
Shortcut
Registered: Jan 18, 2006
Posts: 672
|
As Malday said, he made an autoblock from a Munter. I do understand what he is saying (albeit he has a strong accent). It's basically a method for hauling a second, not belaying. So (in theory) no need for a method to release the load. It is similar to this other knot, that I learned for exactly the same purpose: I do agree he should have been more careful about the biners gates before uploading the video to youtube.
|
|
|
|
|
adatesman
Nov 6, 2009, 2:22 PM
Post #21 of 23
(10561 views)
Shortcut
Registered: Jul 13, 2005
Posts: 3479
|
|
|
|
|
|
dugl33
Nov 8, 2009, 11:32 PM
Post #22 of 23
(10454 views)
Shortcut
Registered: Oct 6, 2009
Posts: 740
|
Funny - I can understand the spaniard perfectly, now knudennoggin on the other hand, not so much. Check this out. Something new for you to test. The nine knot (nudo de nueve) http://www.youtube.com/watch?v=IrBFkxJYTtY http://www.youtube.com/watch?v=TmZzqZikYGQ presumably their test results are in kilos. Figure 8 vs nudo de nueve, mano a mano... can't wait. Cheers. (p.s. interesting to note the breakage was a few inches from the knot, and not at the edge of the knot.)
(This post was edited by dugl33 on Nov 8, 2009, 11:40 PM)
|
|
|
|
|
knudenoggin
Nov 9, 2009, 4:04 PM
Post #23 of 23
(10375 views)
Shortcut
Registered: May 6, 2004
Posts: 596
|
dugl33 wrote: Funny - I can understand the spaniard perfectly, now knudennoggin on the other hand, not so much. Well, ask, and maybe I can help you re the latter. Re the former, there seems to be an exclamation in the Fig.9 testing that leads to the camera being directed from the lefthand knot to the right on, which in fact is which breaks!? -- being able to predict breakage lie that verges on mystical: can you understand what was said then?
In reply to: Figure 8 vs nudo de nueve, mano a mano... can't wait. Nor do you need to: cf. http://www.hse.gov.uk/...df/2001/crr01364.pdf After which you can speculate on how the dubious difference will matter.
In reply to: (p.s. interesting to note the breakage was a few inches from the knot, and not at the edge of the knot.) Look again. The rope breaks within the knot where the standing part bends against eye legs, parts moving in opposite directions, too. Too bad the video isn't of better quality, as some of the movement of knot parts prior to rupture seem odd, but ... . *kN*
(This post was edited by knudenoggin on Nov 12, 2009, 5:33 PM)
|
|
|
|
|
|
|
|
|