|
mohawk-man
Aug 25, 2010, 5:18 AM
Post #1 of 10
(10157 views)
Shortcut
Registered: Aug 25, 2010
Posts: 2
|
Okay so I've looked around researched this a bit, but I can't seem to find a tutorial that help me with constructing a wooden volume. So I was hoping someone here could point me in the right direction, or be so kind to give me a little advice for when I start constructing my first wooden volume for my local gym. I hear its not too difficult, but I wanna make sure that I'm doing it correctly and whatever I make is durable and safe for everyone to climb on. I wanna make volumes of all sizes from very small to extra large, I also want them to bolt to the wall not screw in. Any help at all would be greatly appreciated.
Thank You.
|
|
|
|
|
silentwarior125
Aug 25, 2010, 7:23 AM
Post #2 of 10
(10135 views)
Shortcut
Registered: May 29, 2007
Posts: 20
|
define volume?
|
|
|
|
|
johnwesely
Aug 25, 2010, 11:48 AM
Post #4 of 10
(10109 views)
Shortcut
Registered: Jun 13, 2006
Posts: 5360
|
I think it will be very difficult to make a bolt on volume.
|
|
|
|
|
ax
Aug 25, 2010, 2:43 PM
Post #5 of 10
(10080 views)
Shortcut
Registered: Aug 24, 2001
Posts: 155
|
Motivation Volumes makes bolt on wood volumes. The look pretty nice ..
|
|
|
|
|
|
|
|
dugl33
Aug 25, 2010, 3:51 PM
Post #7 of 10
(10057 views)
Shortcut
Registered: Oct 6, 2009
Posts: 740
|
mohawk-man wrote: Okay so I've looked around researched this a bit, but I can't seem to find a tutorial that help me with constructing a wooden volume. So I was hoping someone here could point me in the right direction, or be so kind to give me a little advice for when I start constructing my first wooden volume for my local gym. I hear its not too difficult, but I wanna make sure that I'm doing it correctly and whatever I make is durable and safe for everyone to climb on. I wanna make volumes of all sizes from very small to extra large, I also want them to bolt to the wall not screw in. Any help at all would be greatly appreciated. Thank You.
A few thoughts to throw in the mix...
1.) You can download google sketch-up** for free. I find a few features to be a little quirky, but you can use it to draw 3D shapes, and rotate to different views. The tape measure tool can take measurements directly off the drawing.
2.) Isometric graph paper (also called plumbers graph paper) can make it easier to draw shapes. You can sometimes find it at plumbing supply houses, or you can download printable pages off the web. Dimensions can be derived mathematically -- just keep clear in your mind what your rise and run is, then pythagorean theorem c = sqrt[(a^2+b^2)]
3.) A good construction calculator (eg Construction Master Pro) can make life easier.
4.) You can template your shapes ahead of time on cardboard. A run by Sears could yield some large refrigerator boxes to cut up and use.
5.) You might be able to find a book called "A roof cutters secrets" (library?) A bit complex but basically anything that can be framed is covered. (You're basically building mini-roof shapes)*
6.) String line can also be used to mock up edges and give you something to visualize and measure.
7.) Gluing up the plywood edges of your shape (w/ gorilla glue for example) can dramatically add to their strength and rigidity. Don't glue it to the wall itself, though... duh.
**********
* Edit to add -- also, "Roof framers bible" is a good rafter book with rise and run tables and edge cut angles, etc.
**Edit to add no2 -- sketch up example below:
(This post was edited by dugl33 on Aug 25, 2010, 5:56 PM)
|
|
Attachments:
|
sketch_up.jpg
(46.9 KB)
|
|
|
|
|
mohawk-man
Aug 25, 2010, 4:50 PM
Post #8 of 10
(10019 views)
Shortcut
Registered: Aug 25, 2010
Posts: 2
|
Thank you all for your help, and great advice. I'm going to start out small for now and hopefully work my way up to creating some large bolt on volumes.
|
|
|
|
|
anykineclimb
Aug 26, 2010, 3:53 PM
Post #10 of 10
(9911 views)
Shortcut
Registered: Mar 30, 2003
Posts: 3593
|
they're pretty easy to build. even with basic carpentry skillz. a think a table saw would make cutting the angles easier but my volumes turned out ok with just a circular saw.
To make em bolt on takes a little more planning but isn't too terrible. you can pretty much run a 2x4 across it and add a hole/ slot.
|
|
|
|
|
|
