|
cupu
Nov 29, 2011, 12:07 PM
Post #1 of 9
(5111 views)
Shortcut
Registered: Nov 29, 2011
Posts: 3
|
Hello everyone, I'm a beginner in indoor climbing and I've just bought some equipment. I'm a bit unsure about the compatibility of my harness (and also of indoor climbing in general) with the carabiner that I've bought. Now the manual of the harness says it's only compatible with carabiners of standard EN 12275 which wikipedia lists as a "Recreation" carabiner. My carabiner though is only certified for EN 362,04-B (wikipedia states that it's for industrial use ...). I use the carabiner for securing the belay device (grigri) to the harness of the persons that belays the climber. Can I have any issues with this setup? as far as I see the specification of the carabiner is pretty much the same as for carabiners that conform to the "recreation" standard; I just thought I'd ask in case there's any danger I'm not seeing. Thank you!
(This post was edited by cupu on Nov 29, 2011, 12:31 PM)
|
|
|
|
|
ajkclay
Nov 29, 2011, 12:36 PM
Post #2 of 9
(5095 views)
Shortcut
Registered: May 9, 2002
Posts: 1567
|
Conditionally - yes it should be ok - go to your nearest climbing shop / gym / crag and ask. Better still, track down your local peak body for climbing and join up, then ask someone there about your gear and also tagging along to learn about climbing from real people (we are all nasty flaming spray monsters waiting under bridges so we can eat little children who have lost their mummies). Also, unless you are trolling, try not to quote wikipedia as your source of information in a place like this, you may as well strap steaks to every inch of your body and go punch a lion in the face. Cheers Adam
|
|
|
|
|
shockabuku
Nov 29, 2011, 1:04 PM
Post #3 of 9
(5081 views)
Shortcut
Registered: May 20, 2006
Posts: 4868
|
It would be much more enlightening to know what carabiner and what harness you are using (manufacturer and model). Most carabiners will be fine but there are some special use biners that aren't the best choice.
|
|
|
|
|
cupu
Nov 29, 2011, 1:18 PM
Post #4 of 9
(5074 views)
Shortcut
Registered: Nov 29, 2011
Posts: 3
|
First of all thanks a lot for the replies! @ajkclay Good one on the wikipedia bit; you're right of course. I've checked that the standards at least match on other parts of the internet (not that that's much better). Also thanks for the advice, I'm going to ask some of the more knowledgeable-looking people at the gym this evening. @shockabuku Indeed. My harness is a black diamond momentum ds http://www.blackdiamondequipment.com/en-us/shop/climb/harnesses/momentum-ds-harness/ The carabiner is a simond goliath HMS: http://www.simond.com/shop/activities/act-11-Sports-climbing/cat-4-Carabiners-Quickdraws/prd-277-Goliath-HMS-screwgate/ Thanks again!
|
|
|
|
|
shockabuku
Nov 29, 2011, 1:24 PM
Post #5 of 9
(5072 views)
Shortcut
Registered: May 20, 2006
Posts: 4868
|
Looks fine to me.
|
|
|
|
|
cupu
Nov 29, 2011, 2:15 PM
Post #7 of 9
(5046 views)
Shortcut
Registered: Nov 29, 2011
Posts: 3
|
I can't believe I missed that. Thanks for the help and sorry for the trouble!
|
|
|
|
|
JimTitt
Nov 29, 2011, 2:18 PM
Post #8 of 9
(5041 views)
Shortcut
Registered: Aug 7, 2008
Posts: 1002
|
Donīt worry, EN362 is a slightly higher and different standard for industrial fall-arrest applications but the Simond Goliath has both norms anyway.
|
|
|
|
|
jae8908
Nov 29, 2011, 5:53 PM
Post #9 of 9
(4999 views)
Shortcut
Registered: May 15, 2011
Posts: 270
|
cupu wrote: I can't believe I missed that. Thanks for the help and sorry for the trouble! Better to ask and know than not ask and risk getting yourself or someone else hurt.
|
|
|
|
|
|