|
FishyScent
Aug 15, 2012, 5:38 PM
Post #1 of 10
(3940 views)
Shortcut
Registered: Aug 1, 2012
Posts: 8
|
Off to college in a couple of weeks and wanted to bring my hangboard. Only problem is that I can't drill into the concrete dorm walls. I figure there is enough surface area on the back of the board for an epoxy or glue to hold it to the wall. Does anyone know of a brand of glue/epoxy that they have either used or heard of. Thanks.
|
|
|
|
|
redlude97
Aug 15, 2012, 5:40 PM
Post #2 of 10
(3937 views)
Shortcut
Registered: Aug 27, 2008
Posts: 990
|
How do you plan to remove the hangboard?
|
|
|
|
|
FishyScent
Aug 15, 2012, 5:46 PM
Post #3 of 10
(3930 views)
Shortcut
Registered: Aug 1, 2012
Posts: 8
|
I kinda just want to deal with that problem when the time comes. maybe I will be able to pry off or use some type of dissolving solution. I just want to get it up there. So to answer your question----no idea but don't really care.
|
|
|
|
|
amarius
Aug 15, 2012, 5:55 PM
Post #4 of 10
(3923 views)
Shortcut
Registered: Feb 23, 2012
Posts: 122
|
Perhaps this will give some ideas?
|
|
|
|
|
redlude97
Aug 15, 2012, 6:25 PM
Post #5 of 10
(3914 views)
Shortcut
Registered: Aug 27, 2008
Posts: 990
|
FishyScent wrote: I kinda just want to deal with that problem when the time comes. maybe I will be able to pry off or use some type of dissolving solution. I just want to get it up there. So to answer your question----no idea but don't really care. Well in that case why not just bolt it to the concrete?
|
|
|
|
|
FishyScent
Aug 16, 2012, 4:33 AM
Post #6 of 10
(3851 views)
Shortcut
Registered: Aug 1, 2012
Posts: 8
|
thats sweet. I just don't want to spend the money. Anyone know any type of glue. I don't want to bolt in because it just seems like it is going to be a big hassle and even more illegal than the glue. I looked over the forums and saw how to bolt and everything but nothing about a specific type of glue/epoxy that someone tried.
|
|
|
|
|
curt
Aug 16, 2012, 4:58 AM
Post #7 of 10
(3839 views)
Shortcut
Registered: Aug 27, 2002
Posts: 18275
|
FishyScent wrote: Off to college in a couple of weeks and wanted to bring my hangboard. Only problem is that I can't drill into the concrete dorm walls. I figure there is enough surface area on the back of the board for an epoxy or glue to hold it to the wall. Does anyone know of a brand of glue/epoxy that they have either used or heard of. Thanks. http://www.rockclimbing.com/...orum.cgi?post=827295 Curt
|
|
|
|
|
FishyScent
Aug 16, 2012, 4:50 PM
Post #8 of 10
(3784 views)
Shortcut
Registered: Aug 1, 2012
Posts: 8
|
Thanks a bunch curt.
|
|
|
|
|
doogievlg
Aug 16, 2012, 11:31 PM
Post #9 of 10
(3747 views)
Shortcut
Registered: Oct 19, 2011
Posts: 19
|
Screw it to a peice of wood. Get to huge c clamps and crank down on it. This thread comes up every summer and thats usually the best answer. I had one rigged up my freshman year and worked great. Now I found a great area 40 minutes from my school so no more plastic. Also dont attempt pull ups on the shower curtain bar.
|
|
|
|
|
herites
Aug 17, 2012, 1:04 PM
Post #10 of 10
(3698 views)
Shortcut
Registered: Apr 10, 2011
Posts: 210
|
Just bolt it. You can cover it up better than an epoxied hangboard. If they are inspecting the rooms often and really anal about it, you'll get caught either way.
|
|
|
|
|
|