|
billcoe_
Nov 6, 2012, 5:04 PM
Post #26 of 35
(1316 views)
Shortcut
Registered: Jun 30, 2002
Posts: 4694
|
Just had to rap with a Munter on Friday. Forgot my ATC, had a HMS-Pearbiner with me. The ropes got twisted but just untwisted them when I got down to each succeeding stance. I rapped first and my partner, who remembered his device, went next to make sure they were fully untwisted.
|
|
|
|
|
masjojon
Nov 6, 2012, 5:07 PM
Post #27 of 35
(1314 views)
Shortcut
Registered: May 19, 2012
Posts: 4
|
I agree with billcoe_ If you find yourself totally naked, no carabiners for the said carabiner brake rappell and without even a harness, you can still do a dulfersitz rappell, but plan on skin grafts to replace the burned skin
|
|
|
|
|
EdBustamante
Nov 6, 2012, 6:09 PM
Post #28 of 35
(1284 views)
Shortcut
Registered: Jun 6, 2012
Posts: 19
|
I carry my old stich plate as a back up light and small and you can always use a munter hitch. |
|
|
|
|
lena_chita
Moderator
Nov 6, 2012, 7:29 PM
Post #29 of 35
(1260 views)
Shortcut
Registered: Jun 27, 2006
Posts: 6087
|
Old thread resurrection, but I was just thinking about this since i saw the other day a guy who had two ATCs, each on a locking biner, AND 3 other locking 'biners on his harness. He was belaying with the 3rd belay device at the time... Now, there's a prepared fellow! Oh, and it was at the gym, of course! With these 25 ft gym toprope climbs, you never know when you need an extra locker or 3 while at the top...
|
|
|
|
|
majid_sabet
Nov 6, 2012, 7:56 PM
Post #30 of 35
(1250 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
1-find the nearest bolt hanger 2-remove the hanger 3-run a loop with rope in to bolt hanger hole and clip the loop with a biner to your harness 4-you just got yourself an emergency ATC system 5-rap and install hanger on the next visit
|
|
|
|
|
redlude97
Nov 6, 2012, 7:58 PM
Post #31 of 35
(1244 views)
Shortcut
Registered: Aug 27, 2008
Posts: 990
|
majid_sabet wrote: 1-find the nearest bolt hanger 2-remove the hanger 3-run a loop with rope in to bolt hanger hole and clip the loop with a biner to your harness 4-you just got yourself an emergency ATC system 5-rap and install hanger on the next visit Perfect solution! Carry a wrench instead of an extra belay device
|
|
|
|
|
amarius
Nov 6, 2012, 8:14 PM
Post #32 of 35
(1235 views)
Shortcut
Registered: Feb 23, 2012
Posts: 122
|
ROFL So, you are going to a gym to climb, typically have 1 belay device, for your own usage. Just being a nice person that you are, your brought extra for someone else, or maybe those fat stiff and used up gym ropes just don't work that great with what you prefer to use. So, that is explanation for two. 3rd one is tough, but what if he/she and the partner are climbing the same rope, and don't bother with switching belay devices? - the person who just finished belaying did not remove his biner/belay device, and the poor chap who is belaying now, is stuck with three - one for belaying, and two more for decoration? Well, that sounded quite plausible?
|
|
|
|
|
lena_chita
Moderator
Nov 6, 2012, 8:24 PM
Post #33 of 35
(1229 views)
Shortcut
Registered: Jun 27, 2006
Posts: 6087
|
amarius wrote: ROFL So, you are going to a gym to climb, typically have 1 belay device, for your own usage. Just being a nice person that you are, your brought extra for someone else, or maybe those fat stiff and used up gym ropes just don't work that great with what you prefer to use. So, that is explanation for two. 3rd one is tough, but what if he/she and the partner are climbing the same rope, and don't bother with switching belay devices? - the person who just finished belaying did not remove his biner/belay device, and the poor chap who is belaying now, is stuck with three - one for belaying, and two more for decoration? Well, that sounded quite plausible? You forgot the explanation for three OTHER locking 'biners, in addition to the ATCs and their respective 'biners. But very good, otherwise,
|
|
|
|
|
ecade
Nov 6, 2012, 9:20 PM
Post #34 of 35
(1211 views)
Shortcut
Registered: Jun 23, 2011
Posts: 132
|
Learn (Learn=know how to tie and understand the application...i.e. the how and the why) the munter hitch and learn to use a prussik or other back up friction hitch and you needn't worry about an extra belay device.
|
|
|
|
|
dagibbs
Nov 6, 2012, 9:41 PM
Post #35 of 35
(1202 views)
Shortcut
Registered: Oct 1, 2007
Posts: 921
|
lena_chita wrote: You forgot the explanation for three OTHER locking 'biners, in addition to the ATCs and their respective 'biners. "Training Weight." That's what I always say at the crag when I'm top-roping up something with half a rack of gear on my harness.
|
|
|
|
|
|