|
eduloni
Oct 15, 2013, 9:25 PM
Post #1 of 13
(17024 views)
Shortcut
Registered: Oct 15, 2013
Posts: 6
|
after the leader finish the pitch and sets up the belay anchor, where and how is the fixed line for the folower is set up? on a locking biner at the masterpoint of the anchor? directly to a bolt?
|
|
|
|
|
rocknice2
Oct 15, 2013, 11:43 PM
Post #2 of 13
(16996 views)
Shortcut
Registered: Jul 13, 2006
Posts: 1221
|
eduloni wrote: after the leader finish the pitch and sets up the belay anchor, where and how is the fixed line for the folower is set up? on a locking biner at the masterpoint of the anchor? directly to a bolt? Saved
|
|
|
|
|
moose_droppings
Oct 16, 2013, 12:11 AM
Post #3 of 13
(16987 views)
Shortcut
Registered: Jun 7, 2005
Posts: 3371
|
Why would you want a fixed line for the second? Don't they want to climb the pitch too?
|
|
|
|
|
dindolino32
Oct 16, 2013, 6:46 AM
Post #4 of 13
(16952 views)
Shortcut
Registered: May 3, 2008
Posts: 155
|
Fixed lines are for aid climbing Moose droppings. back to the original question, the safest way is to create a master point and tie a fig 8 on a bight. Im not the most experienced aid climber out there but I can tell you that it really depends on the setup and who goes next. Sometimes I will create a master point but other times I will just clove hitch the bolts if they are bomber to save time. Sometimes I also just create a an alpine butterfly with a huge bight and then clove the tail to another bolt. method is to use a long sling on one bolt, clove to the sling, then clove directly into the other bolt above. This way it utilizes 1 sling and is equalized. either way, it's most important to identify what is safe. Keeping the anchor organized is one of the best ways to minimize an accident, and keeps you moving with time to spare at the bivy. Go to bigwalls.net and there is a ton of info, but also buying some books also helps. Lastly, start with a short goal of 4 pitches for your first aid climb to get the idea of how it works. I am still learning a ton and am in no way the definitive answer but hopefully this guides you.
|
|
|
|
|
USnavy
Oct 16, 2013, 10:37 AM
Post #5 of 13
(16927 views)
Shortcut
Registered: Nov 6, 2007
Posts: 2667
|
Normally what I do is I put two big lockers on each bolt (for a bolted anchor). Then I tie a double figure eight and clip each ear into each carabiner. After that I throw a 4' sling on each bolt with a sliding X and I use the sling to attach my hauling device to. Anchor done. It is super simple and strong.
|
|
|
|
|
eduloni
Oct 16, 2013, 1:33 PM
Post #6 of 13
(16903 views)
Shortcut
Registered: Oct 15, 2013
Posts: 6
|
its ok to clip three locking carabiners on three bolts and set up two anchors on those three? or use diferent binners for diferent anchors?
|
|
|
|
|
shimanilami
Oct 16, 2013, 2:21 PM
Post #7 of 13
(16894 views)
Shortcut
Registered: Jul 24, 2006
Posts: 2043
|
eduloni wrote: its ok to clip three locking carabiners on three bolts and set up two anchors on those three? This is common practice.
|
|
|
|
|
moose_droppings
Oct 16, 2013, 8:35 PM
Post #8 of 13
(16873 views)
Shortcut
Registered: Jun 7, 2005
Posts: 3371
|
I'm well aware what a fixed line is and they're not exclusive to aid. The reason I framed my question that way is because after reading his other questions in his other threads, I don't believe he knows the correct question for the help he needs. I think he really wants to ask how to set the rope up for belaying up the second.
(This post was edited by moose_droppings on Oct 17, 2013, 1:06 AM)
|
|
|
|
|
dindolino32
Oct 17, 2013, 12:41 AM
Post #9 of 13
(16841 views)
Shortcut
Registered: May 3, 2008
Posts: 155
|
I wasn't sure if u were aware or not. No snarky comment was intended. Did we answer the topic question or not? Now I'm confused.
|
|
|
|
|
moose_droppings
Oct 17, 2013, 1:14 AM
Post #10 of 13
(16833 views)
Shortcut
Registered: Jun 7, 2005
Posts: 3371
|
No problem. My answer to him might of been a little snarky though, but the kid gloves come off in the big wall and aid forum. Though I might have clouded the water, I still think what he's wanting to know is how one sets up the rope for belaying a second at the top of a pitch. Hopefully he'll get back to us on that. ClimbOn
|
|
|
|
|
skiclimb
Oct 20, 2013, 4:16 PM
Post #11 of 13
(16731 views)
Shortcut
Registered: Jan 11, 2004
Posts: 1938
|
I just tend to clove hitch the lead line into the proper point of whatever anchor I built. Then I yell down. Line Fixed! for the cleaner. It's preferable to be able to separate a couple good points so the fixed line, next belay point and haul point don't interfere with each other. Also it makes it much easier to see what is going on so you or your partners don't screw up in a dangerous manner. You do what you can to be organized safely, simply, quickly and efficiently depending on circumstances. If one must overlap various things attached to the anchor bear in mind what order everything will be needing to come off so that your next pitch breakdown goes smoothly and efficiently. This of course takes experience so that it becomes second nature. It's an important part of walling and just takes time to develop.
(This post was edited by skiclimb on Oct 20, 2013, 4:26 PM)
|
|
|
|
|
USnavy
Jan 21, 2014, 9:22 AM
Post #12 of 13
(15652 views)
Shortcut
Registered: Nov 6, 2007
Posts: 2667
|
eduloni wrote: its ok to clip three locking carabiners on three bolts and set up two anchors on those three? or use diferent binners for diferent anchors? Yes it's fine. If there are three bolts I rig the fixed line on two, and the hauling gear on the other two, sharing the middle bolt. That keeps stuff nice and separated.
(This post was edited by USnavy on Jan 21, 2014, 9:22 AM)
|
|
|
|
|
|