|
|
|
|
stuck
Feb 17, 2004, 9:13 PM
Post #1 of 16
(4084 views)
Shortcut
Registered: Jun 1, 2003
Posts: 76
|
It seems that I am doomed to never be able to set up a good slackline. No really, i can not do it. I blew 40 dollars on pulleys and static rope, plus i have an ascender and assloads of misc. webbing. Unfortuantely, i don't think that slacklining will be a possibility for me any more because of several things: -I am not very intelligent. When it comes to pulling an 80 foot piece of string tight between two trees, i get confused and frustrated. -I have no self controlol or patience. For example, i just got back from a park where i was trying to set up an 80 foot line. I have bene excited because i just got a 100 fot length of webbing and wanted to do longer lines. Anyways, i spent about 1.5 hours trying to rig the fucking thing. I have actually spent days mulling over possiblities for pulley systems, and browsing the web looking for insight. I ended up tearing the line down and kicking the dirt and screeming like a 6 year old because even with 100's of dollars worth of tightening system i couldn't pull the thing tight let alone take out the tightening system and tie it off. When i read experienced slakliners saying that all you have to do is "yard on the thing with a 4:1 and tie it off", it seems simple. Here is what i do: -i tie the dead end off to 2 biners with a munter hitch. This takes a long time because i always make the line too short or too long and the tightening system will not fit on the other end. -THEN, i walk to the "live" end and put two pulleys, two on the anchor, and two on the end of the slackline. - I yard on this with an ascneder attached but it never seems to get tight enough, even though i have a mechanical advantage with 4 pulleys. - THE hardest part comes when: i try to tie a line between the anchor and the end of the slackline, the tightening system gets in the way and i always lose a lot of tension. The bad thing about me is that when i get angry i make things worse by breaking stuff. That is why i am afraid to attempt a slackline again, today i came very close to breaking my new camera, burning my webbing, and crushing my pulley's and ascender. It is horrible because doing any frustrating activityis a potential liability. This post probably made no fusdakucking, sense. I don't even get it my self. Can anybody offer me insight into an eaiser way to tie off the line?
|
|
|
|
|
piton
Feb 17, 2004, 9:30 PM
Post #2 of 16
(4084 views)
Shortcut
Registered: Nov 11, 2002
Posts: 1034
|
go to self rigging http://dod.xmission.com/slackline
|
|
|
|
|
stuck
Feb 17, 2004, 9:32 PM
Post #3 of 16
(4084 views)
Shortcut
Registered: Jun 1, 2003
Posts: 76
|
i want a longer line though, i would need to be a beast to pull 80 feet long with a primitive system. I am fully aware of most common tightening systemsd; trucks, ratchet; primitive, SLB, frapping. I am just too dumb to understand it,
|
|
|
|
|
iltripp
Feb 17, 2004, 9:38 PM
Post #4 of 16
(4084 views)
Shortcut
Registered: Oct 6, 2003
Posts: 1607
|
In reply to: I am just too dumb to understand it, On the brighter side of things, at least you are honest with yourself. Most people have a hard time admitting their stupidity. :roll:
|
|
|
|
|
stuck
Feb 17, 2004, 9:40 PM
Post #5 of 16
(4084 views)
Shortcut
Registered: Jun 1, 2003
Posts: 76
|
Yeah, i think the first step to becoming slightly less stupid is knowing that you are.
|
|
|
|
|
slackinfl
Feb 18, 2004, 1:59 AM
Post #6 of 16
(4084 views)
Shortcut
Registered: Jan 14, 2004
Posts: 15
|
Sounds like a deep breath and some medication might help. Seriously, do you know anyone else that slacks. Ask them to help you. If you can do a shorter line, you should be able to do a longer line.
|
|
|
|
|
justsayn2o
Feb 18, 2004, 2:35 AM
Post #7 of 16
(4084 views)
Shortcut
Registered: Feb 13, 2004
Posts: 11
|
i'de say a coke and a smile
|
|
|
|
|
rckfreek
Feb 18, 2004, 2:46 AM
Post #8 of 16
(4084 views)
Shortcut
Registered: Mar 4, 2002
Posts: 149
|
Pud-a lime in da diet coke and drink dem bot-togeda :roll: sorry for the lame post :wink: Climb Hard Rock Freek
|
|
|
|
|
deleted
Deleted
Feb 18, 2004, 3:50 AM
Post #9 of 16
(4073 views)
Shortcut
Registered:
Posts:
|
this is the single funniest post i've ever read. i'm sorry you don't know how to set something like a slackline up, but at least you made me laugh
|
|
|
|
|
rngrchad
Feb 18, 2004, 4:00 AM
Post #10 of 16
(4084 views)
Shortcut
Registered: Feb 9, 2004
Posts: 163
|
I personally have never slack'd, but I always helped a buddy of mine at school set them up. Here is how we did it......100 ft of tubular webbing....wrapped one end of webbing with a figure eight in the end around a tree at least 3 times, and then took a biner' and clipped the rope back onto the rope(hope that made sense).....now for the part where I came into the equation....I would take my Tacoma and drive a hundred foot out and tie the webbing to it....just drive forward to tighten the line and BAM! Instant slacklining enjoyment! :wink:
|
|
|
|
|
scubasnyder
Feb 18, 2004, 4:32 AM
Post #11 of 16
(4084 views)
Shortcut
Registered: Oct 3, 2003
Posts: 1639
|
you will get it eventually, theres a bunch of places online that show you a lot of ways to set one up.
|
|
|
|
|
coldclimb
Feb 18, 2004, 5:05 AM
Post #12 of 16
(4084 views)
Shortcut
Registered: Jan 14, 2002
Posts: 6909
|
Just don't bring lighters, knives, or anything expensive with you when you slackline. ;) Might try powerful fireworks and little plastic army men....
|
|
|
|
|
whiteflash
Feb 18, 2004, 6:07 AM
Post #13 of 16
(4084 views)
Shortcut
Registered: Apr 7, 2003
Posts: 59
|
Heh...don't bring lighters, yet use powerful fireworks. Hmm.... Good luck finding a truck or something that works.
|
|
|
|
|
japhyr
Feb 18, 2004, 3:02 PM
Post #14 of 16
(4084 views)
Shortcut
Registered: Dec 27, 2003
Posts: 77
|
What is the longest line you have set up successfully? Unless you have other people to show you how to do it, learning to set up a line through the internet is usually a process of setting up a few lines that don't work and then figuring out what's not working. One suggestion I would make is increasing the length of your lines in small increments like 10 feet. Jumping from a 20 or 30 foot line to an 80 foot line is a huge difference. Could you post a picture of the way you are setting up? We might be able to point out what's working and what is not working. (That is, assuming you still have not broken your camera!) And what kind of pulleys did you get for $40?
|
|
|
|
|
noshoesnoshirt
Feb 18, 2004, 3:15 PM
Post #15 of 16
(4084 views)
Shortcut
Registered: Jul 24, 2002
Posts: 440
|
$20 for a cheap come-along at a wholesale store and your troubles are over...
|
|
|
|
|
bitsofsod
Feb 18, 2004, 3:18 PM
Post #16 of 16
(4084 views)
Shortcut
Registered: Aug 22, 2002
Posts: 54
|
I agree with japhyr -- start shorter and work longer. I had problems with my line stretching too much so even though I'd get it tight, the thing would stretch more so I'm holding the line to the ground, even on short spans. I use the same setup as piton: http://dod.xmission.com/slackline/slackline.html Try it over a shorter span. If you don't get the right setup at first, it's easy to break down and try again.
|
|
|
|
|
|