Reviews for Americana Ice Screw
Average Rating : 3.75 out of 5
Item Details | Reviews
Review by: brent_e, 2006-03-10
same sentiments are sharpie. Good screw, but big footprint.
Review by: tallnik, 2005-12-08
Sharpie and mother_sheep wrote exactly what I was going to say. Except, I find that when cleaning it one can "palm" the hanger and slide it out faster than with certain older models. One other beef I have with it is that in an anchor one can only put one biner on it if it's placed all the way in. I like the Helixs better from grivel
Review by: sharpie, 2005-01-04
I have one and it's a nice screw, same tube as the 360 with the aggresive bevel teeth and reverse threads, and even easier to start with the knob. But, the problem is, unlike the 360 where you never have to clear any ice because of the minimal footprint, with the Americana you have to either find a perfectly flat area or clear an area about 10-12 inches in diameter to allow the fold out handle to be useful. Once that is done however, it zips in with the expected ease of a Grivel screw.
Problem #2 comes in the clean up. The fold out handle only works in one direction, drive. So, for the second they are essentially cleaning a hanger only screw (no speed device). Not really a big deal, this is the way all screws were cleaned just a few years ago. But, if you climb with new people who have never used/cleaned an old style screw, it might take a little longer.
It does rack better than the 360, but because of the knob, it still will not sit as well as BDs or others when there are multiple screws racked on one biner.
That said, I like having one, but that's as many as I'll ever have.
Review by: mother_sheep, 2004-12-28
Took me a few tries to remember that I didn't have to let go of the screw to make the 360 turn! It bites fast too. I like it!