|
ipass9
Oct 7, 2005, 6:21 PM
Post #1 of 8
(4463 views)
Shortcut
Registered: Oct 17, 2004
Posts: 40
|
just wondering if anyone knows if there is a better bit to use on granite or other hard rocks my bits are not lasting. thanks
|
|
|
|
|
omenbringer
Oct 7, 2005, 6:26 PM
Post #2 of 8
(4463 views)
Shortcut
Registered: Sep 19, 2003
Posts: 248
|
It might help to know what bits you are using currently, and also whether you are hand drilling or using the Bosch? Also after how many holes are they dulling?
|
|
|
|
|
saxonyclimber
Oct 7, 2005, 6:52 PM
Post #3 of 8
(4463 views)
Shortcut
Registered: Jun 16, 2005
Posts: 68
|
I have had good luck drilling with the hilti bits with the cross tips (sorry I can't remember what they are called). They are expensive, but have performed very well for me when drilling with a power drill and drilling by hand in Yosemite
|
|
|
|
|
fear
Oct 7, 2005, 7:58 PM
Post #4 of 8
(4463 views)
Shortcut
Registered: Jun 16, 2003
Posts: 475
|
Try drilling basalt if you think granite is hard.... -Fear
|
|
|
|
|
jred
Oct 7, 2005, 10:15 PM
Post #5 of 8
(4463 views)
Shortcut
Registered: Jul 27, 2003
Posts: 750
|
I have been using Hilti drill bits exclusively for about ten bits. I have found them to be the most durable of what is available to me. I would like to hear if any are better and if so where I could order them. Thanks.
|
|
|
|
|
markguycan
Oct 8, 2005, 5:50 PM
Post #6 of 8
(4463 views)
Shortcut
Registered: Sep 26, 2003
Posts: 136
|
yep hilti bits are a "bit" longer lasting, but I still only get 5-8 holes drilling in Quartzite :cry:
|
|
|
|
|
lextalion
Oct 8, 2005, 11:09 PM
Post #7 of 8
(4463 views)
Shortcut
Registered: Apr 28, 2005
Posts: 216
|
The Hilti or Bosch SDS Max cross tip bits are for cutting re-bar in concrete, these are the thing to use. Ain't cheap but the good things in life never are, but are work every penny. I build custom homes and go thru these like people breath air, and both of these seem to last longer than any of the other brands out there. I'm not sure how I would feel using them in a hand drill for climbing, but then again luxury verses weight may be an issue.
|
|
|
|
|
peterpan
Oct 9, 2005, 12:40 AM
Post #8 of 8
(4463 views)
Shortcut
Registered: Mar 30, 2003
Posts: 36
|
I drilled around a thousand holes, and concluded the Hilti cross-tip bit in combination with a high performance drill hammer action, such as offered by a Hilti drill, or the new Bosch, drills you most holes in a smallest amount of time. The same bit ages faster in a less efficient drill hammer. The diameter matters too in terms of displacement performance. I found 10mm very good. Smaller clears less efficiently, larger takes too long. This way, I am getting 30 to 40 holes out of a bit (subject to drill depth). Of course after 15-20 holes the penetration speed is declining. At times I found harder rock easier to drill because it chips better on bit impact. Some granites drilled easier than some limestones!
|
|
|
|
|
|