Search for
Forums: Climbing Disciplines: Sport Climbing: Re: [ceramiclover] Bolting a Ropes Course Wall: Edit Log




USnavy


Mar 30, 2010, 8:40 AM

Views: 19575

Registered: Nov 6, 2007
Posts: 2667
Re: [ceramiclover] Bolting a Ropes Course Wall
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (0 ratings)  
ceramiclover wrote:
The main problem is that I need a a bolt that will take a nut at the back, rather than a concrete expansion bolt.
Yea that’s called a machine bolt, AKA the most popular bolt in the world, AKA the bolt type that can be found at any hardware store in the world. I would use 3/8" stainless steel bolts if it’s outside or 3/8" grade eight bolts if inside. If you place stainless steel hangers you MUST place stainless steel bolts. DO NOT mix grade 8, 5, or 2 bolts with stainless steel hangers.

Are you bolting the wall for lead climbing? What are the bolts going to be used for?


(This post was edited by USnavy on Mar 30, 2010, 8:41 AM)



Edit Log:
Post edited by USnavy () on Mar 30, 2010, 8:41 AM


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?