Forums: Climbing Disciplines: Sport Climbing: Re: [jeepnphreak] Bolts....: Edit Log




jae8908


Sep 19, 2011, 8:17 PM

Views: 2583

Registered: May 15, 2011
Posts: 270

Re: [jeepnphreak] Bolts....
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (0 ratings)  

jeepnphreak wrote:
jae8908 wrote:
jeepnphreak wrote:
"jae8908 wrote:
The guys in this video are anchoring off of the belay loop on their harness. Why?

Are you implying that belay loops are not ment to hold body weight?

No, I'm implying that the belay loop and carabiner are an extra variable to go wrong. I learned to eliminate as many variables as possible when my life is at risk. I tie into my harness unless top roping in a gym.


ha so you climb with two harnesses, and two ropes with two belay devices and you use two quick draws on each bolt...

These guys are suspended from an above anchor and using accenders to make upward progression. Anchoring from a bely loop is just fine. Besides your trust your belay loop to catch a 25 foot whipper...no? Sitting on the belay loop is fine. you trust one piece of webbing to hold your carabiners together in a quick draw...
If you listen to the commentary the bolts are pulling at about 80 lbs (40 kilos) of force, well less than half the wiehgt of a grown guy.

While I understand all of this and have thought it through before I started posting, I don't understand why anyone would want another variable that could go wrong. Wasn't safety the topic of this thread anyway. I'm not arguing about it. Everyone has their own way of doing things and I just wouldn't have done it their way.
(edit) I would have tied in and used the belay loop to pull on the bolts. Definitely not have worn two harnesses.


(This post was edited by jae8908 on Sep 19, 2011, 8:19 PM)



Edit Log:
Post edited by jae8908 () on Sep 19, 2011, 8:19 PM


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?