|
kc2lvh
Sep 7, 2006, 2:27 PM
Post #1 of 20
(2837 views)
Shortcut
Registered: Sep 7, 2006
Posts: 5
|
I'm looking for a new harness, and the feature I really want is a rated haul loop that can be used for aussie rapelling. I've checked out a bunch of harnesses, and most that mention the haul loop sometimes refer to it as "full strength" or just "rated." This is kind of vague for me. I know ABC makes a cheap harness with a haul loop that can be used (my school had those), but I want one that's padded with gear loops too. I've seen people clip right into the waistbelt, but I'd rather have a loop to clip into. Any suggestions on how much the haul loops should hold or specific harnesses I should check out?
|
|
|
|
|
dynoho
Sep 7, 2006, 3:45 PM
Post #2 of 20
(2837 views)
Shortcut
Registered: Jul 16, 2006
Posts: 285
|
The Metolius Safe-Tech harness has a rear haul loop rated to 16Kn which should be plenty for your application.
|
|
|
|
|
hosh
Sep 7, 2006, 3:50 PM
Post #3 of 20
(2837 views)
Shortcut
Registered: Dec 15, 2003
Posts: 1662
|
Just a question, but what would be the advantage of Aussie Rapin' anyway? Why not just go down the good ol' fashioned Yankee way? hosh.
|
|
|
|
|
euroford
Sep 7, 2006, 4:03 PM
Post #4 of 20
(2837 views)
Shortcut
Registered: Aug 26, 2002
Posts: 2913
|
sounds like an insanely stupid thing to do.
|
|
|
|
|
percious
Sep 7, 2006, 4:31 PM
Post #5 of 20
(2837 views)
Shortcut
Registered: May 19, 2005
Posts: 140
|
Its good if you need to shoot at people on the way down. -percious
|
|
|
|
|
redlegrangerone
Sep 7, 2006, 4:38 PM
Post #6 of 20
(2837 views)
Shortcut
Registered: Dec 21, 2005
Posts: 851
|
Aussie style is good for getting down quick. It is really important when you are taking fire. But, it is also the most dangerous way down. In the service, splat vs. gunshot was a good trade-off. In climbing, I do not think it is a good trade-off.
|
|
|
|
|
kc2lvh
Sep 7, 2006, 4:52 PM
Post #7 of 20
(2837 views)
Shortcut
Registered: Sep 7, 2006
Posts: 5
|
I've taken to aussi rapelling for two reasons. First, I just love it - it gives me a rush. Second, we use it at camp to run down a rock face with torches to light a campfire. Also, the belay mechanism works just the same as with normal rapelling - you pull, you stop, so there's really not much difference as long as the haul loop is rated for weight - and as with normal rapelling there is someone on belay to pull tight in case you let go. We're also using 11mm chord - the army's combat rapell line is 3mm, and most people use 9-10mm - so it slows you down a bit.
|
|
|
|
|
thegroundhurts
Sep 7, 2006, 4:56 PM
Post #8 of 20
(2837 views)
Shortcut
Registered: Dec 13, 2005
Posts: 28
|
If you're on solid ground before you start the rappel, just put your harness on backwards, it'll even move the padding to the side you want it on.
|
|
|
|
|
shockabuku
Sep 7, 2006, 4:59 PM
Post #9 of 20
(2837 views)
Shortcut
Registered: May 20, 2006
Posts: 4868
|
Aaaaaaaaaaaaaaaaaahhhhhhhhhhhhh! :x (Mostly) Total nonsense.
|
|
|
|
|
mdavid01
Sep 7, 2006, 5:40 PM
Post #10 of 20
(2837 views)
Shortcut
Registered: Nov 23, 2005
Posts: 31
|
"Second, we use it at camp to run down a rock face with torches to light a campfire." are you serious? I'm not sure if I should point out the obvious errors in judgement, encourage you to build larger torches or correct you by saying that the military does not ever rap off 3mm cord.
|
|
|
|
|
andypro
Sep 7, 2006, 10:35 PM
Post #11 of 20
(2837 views)
Shortcut
Registered: Aug 23, 2003
Posts: 1077
|
The thinnest line the military uses for rappels is 5mm. And tha'ts an emergency last ditch resort sort of thing. 99.999999% of the time it's 11mm static (or maybe half inch? I never brought calipers out). And that 5mm line is only carried by the specialest of special forces... Aussie rappeling is not always good for shooting. It's difficult to shoot accurately because your body is essentially unsupported. You generally really shouldn't be shooting people while rappelling anyways. It's a good way to get yourself kilt. Aussie rappeling clipped to the haul loop hurts alot more than clipping it all the way through waist belt (to me anyways). Just my thoughts.
|
|
|
|
|
jimdavis
Sep 7, 2006, 11:21 PM
Post #12 of 20
(2837 views)
Shortcut
Registered: May 1, 2003
Posts: 1935
|
In reply to: The thinnest line the military uses for rappels is 5mm. And tha'ts an emergency last ditch resort sort of thing. 99.999999% of the time it's 11mm static (or maybe half inch? I never brought calipers out). And that 5mm line is only carried by the specialest of special forces... Aussie rappeling is not always good for shooting. It's difficult to shoot accurately because your body is essentially unsupported. You generally really shouldn't be shooting people while rappelling anyways. It's a good way to get yourself kilt. Aussie rappeling clipped to the haul loop hurts alot more than clipping it all the way through waist belt (to me anyways). Just my thoughts. Agreed. I rode a zipline clipped into my rear haul loop on my SafeTech harness and it hurt like a mofo. Also, you'll rip out some of the directional stitching on the harness doing this. It's still full strength, but it's stitched in place anticipating a downward pull on your harness....the outward and up, pull of a rappel device back there will rip out some of the (non bartack) stitching. If you want a rush that bad...go bite some tin foil. It's fools like you that make climbing seem more dangerous than it already is to the un-informed public. Jim
|
|
|
|
|
kc2lvh
Sep 8, 2006, 12:41 AM
Post #13 of 20
(2837 views)
Shortcut
Registered: Sep 7, 2006
Posts: 5
|
If you take a fall into your harness (i.e. from the platform of a zipline onto the zipline) it's bound to hurt, even if you're hooked up in front. I have rappelled aussie before, and I didn't think it hurt at all, even in an ABC harness with no padding - the key is to just walk down, not jump. I didn't mean to make myself out to as a daredevil, but I and most of the people I've climbed with go aussie occationally for fun. They have harnesses with haul loops designed for rappelling, and I was interested in finding out if anyone has suggestions on harnesses. I didn't ask for judgements on my behavior.
|
|
|
|
|
iamthewallress
Sep 8, 2006, 12:59 AM
Post #14 of 20
(2837 views)
Shortcut
Registered: Jan 2, 2003
Posts: 2463
|
If you take a shorty sewn spectra runner (i.e. the middle part of a homemade quickdraw) and feed it around the waist band of any rated harness, you'll have yourself a rated haul loop.
|
|
|
|
|
jimdavis
Sep 8, 2006, 4:03 AM
Post #15 of 20
(2837 views)
Shortcut
Registered: May 1, 2003
Posts: 1935
|
In reply to: If you take a fall into your harness (i.e. from the platform of a zipline onto the zipline) it's bound to hurt, even if you're hooked up in front. I have rappelled aussie before, and I didn't think it hurt at all, even in an ABC harness with no padding - the key is to just walk down, not jump. any way you do it, the waistbelt will be cutting into your stomach. there was no sudden fall...if you think about how much slack is built into ziplines...it become rather gentle whether you sit down into one of jump onto it.
|
|
|
|
|
deltav
Sep 8, 2006, 6:04 AM
Post #16 of 20
(2837 views)
Shortcut
Registered: Sep 29, 2005
Posts: 597
|
In reply to: If you're on solid ground before you start the rappel, just put your harness on backwards, it'll even move the padding to the side you want it on. Stupid advice :shock: WTF
|
|
|
|
|
iamthewallress
Sep 9, 2006, 12:01 AM
Post #17 of 20
(2837 views)
Shortcut
Registered: Jan 2, 2003
Posts: 2463
|
In reply to: In reply to: If you're on solid ground before you start the rappel, just put your harness on backwards, it'll even move the padding to the side you want it on. Stupid advice :shock: WTF Why is it stupid?
|
|
|
|
|
fleshwater
Sep 9, 2006, 12:39 AM
Post #18 of 20
(2837 views)
Shortcut
Registered: Oct 16, 2005
Posts: 49
|
Kinda hijacking the guys thread here folks... all he wanted was some info and opinions on the narnesses. Everyone climbs for fun despite the danger, if the dude wants to come down aussi style cause its fun then more power to him.
|
|
|
|
|
el_layclimber
Sep 9, 2006, 12:40 AM
Post #19 of 20
(2837 views)
Shortcut
Registered: Jan 9, 2006
Posts: 550
|
In reply to: In reply to: In reply to: If you're on solid ground before you start the rappel, just put your harness on backwards, it'll even move the padding to the side you want it on. Stupid advice :shock: WTF Why is it stupid? I don't know either, but it probably involves kilonewtons. In response to the OP's question: I all the harnesses you really like don't feature a haul loop, you can easily make one. A single or doubled loop of supertape or other skinny webbing tied in a water knot costs about 30 cents, and you won't even notice it's there.
|
|
|
|
|
coolklimber
Sep 9, 2006, 4:40 AM
Post #20 of 20
(2837 views)
Shortcut
Registered: Jan 9, 2006
Posts: 299
|
http://www.mec.ca/Products/product_listing.jsp?FOLDER%3C%3Efolder_id=2534374302690983&bmUID=1157776830261
|
|
|
|
|
|