|
dirtbagger
Mar 10, 2007, 6:54 PM
Post #1 of 18
(8155 views)
Shortcut
Registered: Feb 18, 2005
Posts: 50
|
Hi there Was wondering, has anybody ever been using ascenders with "teethed" cams, which happened to strip a rope on a full fall? The reason I am asking, is I have read heaps about the issue with the teeths ripping the mantel of the rope etc! BD has or is bringing out the new NForce ascender, which doesn't have any teeth's on the cam! Hence this wouldn't be a problem! But then against that, I have used Petzl ascenders for the last 15 years and never had a rope break or damaged with the use! But then I have never fallen on a ascender either! Just wondering how common the rope sheath damage is due to teethed cams? I guess the best against teeths, is that if iced up or dirty ropes are used, it doesn't matter? cheers dirtbagger
|
|
|
|
|
dcaldous
Mar 10, 2007, 7:52 PM
Post #2 of 18
(8137 views)
Shortcut
Registered: Sep 12, 2006
Posts: 28
|
I've snagged the sheath of a rope with a tibloc ascender that wasn't set very well. In general the ascenders don't cause significant sheath damage unless the forces are larger than about 4 kN according to the information Petzl provides. The N-Force ascenders do have teeth they just aren't as big and as agressive as the Petzl ascenders. They don't need to be as agressive because the pinching force is greater with their four bar linkage.
|
|
|
|
|
skinner
Mar 10, 2007, 8:44 PM
Post #3 of 18
(8118 views)
Shortcut
Registered: Nov 1, 2004
Posts: 1747
|
I've never seen or heard of damage from an ascender that was significant, like a core shot or something. Ascenders tend to gradually cause wear to the mantle as the teeth grab and pull on the fibers. I had a 10mm static that had been jugged on so many times the mantle was fluffed and puffed up so that it looked like a 12mm. I did search the web for a while looking for evidence of an ascender significantly damaging a rope, and found nothing. I'd be interested in seeing these articles you have read where damage like this occurred. -Kevin
|
|
|
|
|
Davey
Mar 11, 2007, 6:18 AM
Post #4 of 18
(8069 views)
Shortcut
Registered: Feb 2, 2007
Posts: 294
|
I was looking on BD's web site and it looked like the Nforce has teath to me. could be wrong but the one on the left in the pic looks like it has small teath on the cam.
|
|
|
|
|
dontmaytagme
Mar 11, 2007, 7:03 AM
Post #5 of 18
(8057 views)
Shortcut
Registered: Jun 1, 2003
Posts: 224
|
no
|
|
|
|
|
moof
Mar 11, 2007, 8:36 PM
Post #6 of 18
(8011 views)
Shortcut
Registered: Oct 17, 2003
Posts: 400
|
Looks like nubs to me. Not sure what overly anal distinction between nubs and teeth is, but I wouldn't think less of someone calling them teeth. Much less agressive than the Petzl ones for sure. Even things like the Gibbs have features on the cam, it's not a smooth surface. Who cares?
|
|
|
|
|
oldsalt
Mar 11, 2007, 10:13 PM
Post #7 of 18
(7994 views)
Shortcut
Registered: Jan 19, 2004
Posts: 919
|
I, too, have damaged a rope sheath with a Ti-bloc. I thought that tips of the teeth had released from the sheath and released my backup. I continued to use the rope, because the core was intact and it was in the last 10 feet.
|
|
|
|
|
linvillelover
Mar 19, 2008, 2:57 AM
Post #8 of 18
(7728 views)
Shortcut
Registered: Oct 19, 2006
Posts: 43
|
i hope you tie in with a 10 foot tail.
|
|
|
|
|
nunatak
Mar 19, 2008, 4:51 AM
Post #9 of 18
(7690 views)
Shortcut
Registered: Oct 29, 2006
Posts: 48
|
dirtbagger wrote: Hi there Was wondering, has anybody ever been using ascenders with "teethed" cams, which happened to strip a rope on a full fall? The reason I am asking, is I have read heaps about the issue with the teeths ripping the mantel of the rope etc! BD has or is bringing out the new NForce ascender, which doesn't have any teeth's on the cam! Hence this wouldn't be a problem! But then against that, I have used Petzl ascenders for the last 15 years and never had a rope break or damaged with the use! But then I have never fallen on a ascender either! Just wondering how common the rope sheath damage is due to teethed cams? I guess the best against teeths, is that if iced up or dirty ropes are used, it doesn't matter? cheers dirtbagger Am I wrong, or are ascenders and such not designed for or rated for full falls. Ascending a rope is working or hanging weight, not full force fall weight. Am I wrong?
|
|
|
|
|
majid_sabet
Mar 19, 2008, 5:13 AM
Post #10 of 18
(7673 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
nunatak wrote: dirtbagger wrote: Hi there Was wondering, has anybody ever been using ascenders with "teethed" cams, which happened to strip a rope on a full fall? The reason I am asking, is I have read heaps about the issue with the teeths ripping the mantel of the rope etc! BD has or is bringing out the new NForce ascender, which doesn't have any teeth's on the cam! Hence this wouldn't be a problem! But then against that, I have used Petzl ascenders for the last 15 years and never had a rope break or damaged with the use! But then I have never fallen on a ascender either! Just wondering how common the rope sheath damage is due to teethed cams? I guess the best against teeths, is that if iced up or dirty ropes are used, it doesn't matter? cheers dirtbagger Am I wrong, or are ascenders and such not designed for or rated for full falls. Ascending a rope is working or hanging weight, not full force fall weight. Am I wrong? you are correct. They are not designed to take fall.
|
|
|
|
|
marde
Mar 19, 2008, 4:12 PM
Post #11 of 18
(7620 views)
Shortcut
Registered: Sep 3, 2006
Posts: 169
|
I think the "oh my god the teeth are gonna cut my rope" thing is pretty much a myth. Otherwise the rock below el cap would be red. Speaking of damage to the rope: toproping wears out your rope way faster than jumaring.
|
|
|
|
|
tolman_paul
Mar 19, 2008, 5:47 PM
Post #12 of 18
(7575 views)
Shortcut
Registered: Apr 22, 2005
Posts: 385
|
I'd rather have the teeth fuzz the rope over time, than make negative progress on an icey rope
|
|
|
|
|
dingus
Mar 19, 2008, 6:20 PM
Post #13 of 18
(7550 views)
Shortcut
Registered: Dec 16, 2002
Posts: 17398
|
I own Pretzels and yellow handled jumars. If the 'jug must not slip' I want the pretzels. But if I'm working fixed ropes, going up and down, hauling loads etc? I want the Jumars. the difference is the teeth - the pretzels are too easy to catch. So using them, for example, as a self-belay device for rapping fixed ropes can be VERY frustrating. On the other hand, a jumar slipping on an iced rope can be terrifying. DMT
|
|
|
|
|
vashie
Mar 20, 2008, 3:24 AM
Post #14 of 18
(7461 views)
Shortcut
Registered: May 12, 2004
Posts: 149
|
Well let me step out of the wall gumby closest here for a second. I have taken a "fall" on an ascender. It was my gold Petzl (left). I was cleaning a pitch and my leg went trough the aider and I took a static fall on the sling I was attached to the ascender with. I experienced no rope damage to speak of and the thing held like a champ. as for the "nforce" its not a new design, Kong made an ascender with that design for several years. If I remember correctly they also had glow-in-the-dark handles.
(This post was edited by vashie on Mar 20, 2008, 3:25 AM)
|
|
|
|
|
russwalling
Mar 20, 2008, 6:01 AM
Post #15 of 18
(7438 views)
Shortcut
Registered: Jun 12, 2002
Posts: 239
|
vashie wrote: I was cleaning a pitch and my leg went trough the aider and I took a static fall on the sling I was attached to the ascender with. I experienced no rope damage to speak of and the thing held like a champ. Only to nitpick... not really a static fall... there was rope in the system, dynamic rope, above your ascender. Calling what happened a "fall" brings back all the bad memories of the "daisy death" threads. As to the OP: A real lead type fall will damage the rope. Normal bull crap that we do ad nauseum will not damage your rope in 97.463% of cases. Ps: Dirtbagger, you are who I think you are right? Cheers!
|
|
|
|
|
moof
Mar 20, 2008, 3:52 PM
Post #16 of 18
(7382 views)
Shortcut
Registered: Oct 17, 2003
Posts: 400
|
Recent data indicates it's more like 97.561%.
|
|
|
|
|
sizzlechest
Mar 21, 2008, 11:54 PM
Post #18 of 18
(7296 views)
Shortcut
Registered: Sep 23, 2001
Posts: 139
|
mmmmmm, pretzels......
|
|
|
|
|
|