|
yodadave
Apr 3, 2013, 3:54 PM
Post #1 of 7
(4878 views)
Shortcut
Registered: Feb 11, 2008
Posts: 510
|
I need a 12mm sds drill bit, very occasional use in granite. Maybe 6 holes right now. Recommendations?
|
|
|
|
|
billcoe_
Apr 3, 2013, 10:38 PM
Post #3 of 7
(4803 views)
Shortcut
Registered: Jun 30, 2002
Posts: 4694
|
yodadave wrote: I need a 12mm sds drill bit, very occasional use in granite. Maybe 6 holes right now. Recommendations? Sure, if this is for bolting, sell your metric wedge anchors and buy 1/2" diameter. I was picking up 6 packs of TE-C3X 1/2 " Drill Bits on Ebay for $35 each couple years back when I went drill/bolt batshit crazy. When you're installing over 350 1/2 " x 7" long stainless wedge anchors with stainless hangers, nice to find another place to economize some. Keep an eye on them as they wear, if it wears on the side so that it's hard to install the bolt, replace the bit.
|
|
|
|
|
yodadave
Apr 4, 2013, 2:50 PM
Post #4 of 7
(4730 views)
Shortcut
Registered: Feb 11, 2008
Posts: 510
|
thanks mattm only problem is ill have to buy some aliens so i can qualify for free shipping ;)
|
|
|
|
|
mattm
Apr 4, 2013, 3:02 PM
Post #5 of 7
(4723 views)
Shortcut
Registered: May 20, 2003
Posts: 640
|
Ha - Yeah, I think I got mine when I did a hanger order. If you cruise the FS adds on MtnProj you might find a deal. I got two of my 12mm bits from a guy on there. Never used these guys but an option - shipping looks to be $7.50 or so http://www.buydrillbits.com/...ep2.php?s=SDS-METRIC
|
|
|
|
|
Syd
Apr 6, 2013, 9:16 PM
Post #6 of 7
(4615 views)
Shortcut
Registered: Oct 25, 2012
Posts: 300
|
billcoe_ wrote: [image]http://www.cascadeclimbers.com/plab/data/500/medium/Replacement_wedge_anchor.jpg[/image] You don't use those bolts in sandstone do you ?
|
|
|
|
|
majid_sabet
Apr 7, 2013, 3:27 AM
Post #7 of 7
(4570 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
yodadave wrote: I need a 12mm sds drill bit, very occasional use in granite. Maybe 6 holes right now. Recommendations? Hilti 2 or 4 head SDS . for 1/2 or 12mm on hard rock you want to drill in two steps. first use 1/4 " drill for pilot hole then 12mm . you can buy good SS 1/2 bolt on ebay cheap.
|
|
|
|
|
|